ASC - Artisan Stone Dye

Artisan Stone Dye Information

Description: Artisan Stone Dye is a water-based extra-strength decorative and breathable protective stain for porous vertical surfaces. ASD utilizes state-of-the-art acrylic polymer technology and pigment preparation to ensure the highest quality results. It is an excellent tool for creating realistic rockscapes as well as natural color for any vertical concrete surface.

Artisan Stone Dye incorporates high pigment solids for easily controlled color depth while achieving a more natural, satin appearance vs. traditional concrete stain products. ASD stains are water submersible, alkali, weather and ultraviolet-light resistant after a minimal drying time of 48 hours with superior adhesion to interior and exterior concrete surfaces allowing the user to apply this stain to a variety of projects. Apply a sealer, such as UV 350 CurbCure to improve the ability to remove mineral build up from water features as well as to improve resistance to wear and water erosion.

Low Odor
Low VOC
Low Sheen
Natural Appearance
Weather Resistant

Ultra Violet Light Resistant
Alkali Resistant
Water Submersible
Fast Air Dry
Overnight Deliverable NO RED LABEL

Dilution / Mixing: Artisan Stone Dye is supplied as a concentrate. The recommended dilution ratio is 1 part concentrate to 4 parts distilled, deionized or reverse osmosis water. Concentrate will result in ready to use stain by simply stirring mixture. Increased transparency as well as lighter color shade can be achieved by increasing the dilution ratio (amount of water to concentrate). The dilution ratio should not surpass 1 part concentrate to 8 parts distilled, deionized or reverse osmosis water. Decreasing the dilution ratio of the Classic Series (e.g. 1 part concentrate to 1 part water) will increase hide or opacity. This allows the applicator to cover stains and blemishes as well as achieve uniformity on different surfaces.

Area Preparation: Be sure to mask or cover all areas that are not intended to be stained including but not limited to door frames, doors, walls and windows. Surface Preparation: The surface preparation phase should be viewed as the most important. Proper preparation results in the dyes longevity, minimizes potential failures and creates the best environment for an aesthetically pleasing work of art. In short, the more detail and time allotted to this phase of the project will dramatically affect the appearance and durability of the finished surface. The surface must be free of all foreign materials that would inhibit the absorption of Artisan Stone Dye’s Colors. Foreign materials include, but are not limited to grease, dirt, glue, previous coatings, and sealer. Do not use an acid etch as a cleaning method. 1) Open the pores of the surface via pressure washing. Use a parallel overlapping line pattern to insure a properly cleaned surface

Application Method: To achieve a natural variegate appearance, ASD stains should be applied by creating a mist via an airless sprayer, High Volume Low Pressure (HVLP) sprayer, pump sprayer or trigger spray bottle. A variegated or natural finish is achieved through the various absorbencies of the surface material as well as the accumulation of the color pigments. Roller application methods force absorption resulting in mechanical lines Brush/Sea Sponge.

Application: For application areas where coverage and product control is warranted, apply ASD with a sea sponge or traditional bristle brush (e.g. corners and faux finishes). Using this method of application may result in the appearance of mechanical lines. Secondary/Highlight Color: To achieve increased color depth or mottled appearance. A secondary or highlight coat can be applied as soon as initial ASD color is dry to the touch (approximately 15 minutes).